PREPARE BEFORE YOU CUT

Create a laser material test grid

Build a labelled SVG table for a small material offcut. Compare a limited power and speed range before you run a full job.

Create a laser material test grid

Set a safe test range

This is a manual planning SVG. It does not control your laser or replace its safety setup.

Manual table: the SVG carries labels only; assign settings yourself. For an automatic LightBurn Material Test, open Laser Tools → Material Test.

Grid settings

Safe grid templates
Work area

Preview

100%
Preview

Record the result

Continue preparing files

Prepare a photo→Check SVG→Arrange on sheet→Calculate product profit→

Practical guide

Compare a useful range without guessing

  1. Use the same material, thickness and finish as the final job whenever possible.
  2. Choose one of the conservative templates, then adjust only the values you need to compare.
  3. Check that the grid fits your working area and that labels are large enough to read.
  4. Import the SVG as a manual labelled layout, then set the operation in your laser program.
  5. Record the best cell and make a small confirmation test before a production run.

Questions and answers

Create a laser material test grid

Does this set the laser power automatically?

No. The SVG has labelled geometry only. It does not store machine commands.

Why use the LightBurn Material Test separately?

It can assign values to cells inside LightBurn. Use this SVG when you want a portable visual table or must enter parameters manually.

Are the templates safe presets?

They provide a restrained grid structure, not machine settings. Always start with your material and machine safety procedure.